Fertilizing and Watering
|
Subject: Spraytech Oil
|
|
From
|
Location
|
Message
|
Date Posted
|
North Shore Boyz |
Mill Bay, British Columbia
|
While going through my unused Agro-K products I found a litre of Spraytech Oil that I never used.
I've not used an adjuvant before and wondered how much of this product I use per gallon of water.
The info is not on the label and I can't find it online....anyone using Spraytech Oil? I could really use the mixing rates please.
Thanks/Glenn
|
7/12/2011 12:16:19 PM
|
Kevin Snyder (TEAM HAMMER) |
Kevinstinindians@yahoo.com
|
1/4 oz per gallon Glenn.
|
7/12/2011 12:36:09 PM
|
North Shore Boyz |
Mill Bay, British Columbia
|
Thanks Kevin...much appreciated! I'll add it to my rotation.
|
7/12/2011 1:18:33 PM
|
Bohica (Tom) |
Www.extremepumpkinstore.com
|
Glenn, it is a great product, but it will gum up a sprayer fast.
|
7/12/2011 1:25:22 PM
|
Zander |
Buffalo, new York, USA
|
A caution that was part of the Agro_k Program warns the the oil should not be used on days when the expected tempurature could exceed 80 Degrees F.
|
7/12/2011 6:02:08 PM
|
North Shore Boyz |
Mill Bay, British Columbia
|
Thanks Tom & Zander as well...
So Tom, does Turbo product also do the same?
Thanks Zander, I wait for cloudy cooler days in the evening...been there...done that with a few Agro-K products that were sun sensitive...
|
7/12/2011 6:25:08 PM
|
Bohica (Tom) |
Www.extremepumpkinstore.com
|
Glenn, I havent had it gum up on me yet.
|
7/12/2011 9:06:26 PM
|
TruckTech1471 |
South Bloomfield, Ohio
|
Tom speaks the truth Glenn. I used it for a short while and found that it gummed up my Stihl tank and was difficult to clean out. If you MUST use a surfactant, use a commercial grade non-ionic one. Better yet, use yucca extract at 1/2 oz. per gallon.
|
7/12/2011 9:17:32 PM
|
North Shore Boyz |
Mill Bay, British Columbia
|
Thanks guys.
Joe, this was left over from an Agro-K order that I've never used...I don't want to foul up my sprayer so I might look into something else. Just thought it might help the fungicide program to stick to the leaves a little better.
Plant sure looked nice after using it!!
|
7/13/2011 12:45:05 AM
|
Gourdzilla |
San Diego, Ca.
|
Glenn, I've been using Spraytech oil for several years and haven't had any problems with it gumming up my sprayer. I use 1/4 oz. per Gallon rate also. I would think if you had problems with getting your sprayer gummed up you could always run a good degreaser (Super-Clean or maybe Simple Green)and some very hot water through your sprayer or some other type of cleaner that breaks down the oil. Glenn I'll email you the instructions for using it.
|
7/15/2011 12:14:59 AM
|
Andy W |
Western NY
|
I used it a bunch in a (hand pump) backpack sprayer, never noticed any buildup.
|
7/15/2011 10:35:31 AM
|
North Shore Boyz |
Mill Bay, British Columbia
|
Thanks Vince, I had lost that in a hard-drive crash so that is great!!
Andy, what do you mix with it for best results?
|
7/15/2011 11:16:41 AM
|
lcheckon |
Northern Cambria, Pa.
|
Never had a problem either. I use 2 tablespoons per gallon mixed with 2 tablespoons of baking soda for PM. Do not apply on or just before a hot sunny day though. Some time ago Cornell U. found that it is much more effective with the baking soda. Here is one of the many articles on the mixture: http://www.whyy.org/91FM/ybyg/fungicide.html
|
7/15/2011 12:36:54 PM
|
Total Posts: 13 |
Current Server Time: 9/2/2024 5:21:33 AM |